Carbonfiberhoods.com Everything Carbon Fiber for your car!

18Aug/110

How to Install Side Skirts

NOTE (very important): Pre-fit all parts prior to installation. Carbonfiberhoods.com is not responsible for any damage/s due to negligent installation. We recommend that all parts be installed by a certified professional.

1 - Requires specific measurements for successful installation.
2 - Requires minimal tools, primarily involves a bolt-on install. No drilling should be required.
3 - May require removal of surrounding stock parts and stock hardware for installation and minor drilling into body of vehicle.
4 - Requires removal of many surrounding stock parts and stock hardware for installation and may require some sanding. Cutting, shaving, filling in gaps, etc. (Recommended that you bring to a skilled professional.)
5 - Requires cutting into the body of the vehicle and heavy fabrication. (Recommended that you bring to a skilled professional.)

General Info:

- Remove factory side skirts.
- Pre-fit side skirts. (Minor sanding or filing may be required to achieve the desired fit)
- You may need to drill mounting holes, industry standard brands such as Duraflex side skirts and Carbon Creations side skirts.

- Install side skirts using self tapping screws provided. Place a minimum of 2 screws staggered throughout the front wheel well and rear wheel well. Screws can be placed in the door jam or under the side skirt. Do not over tighten screws.

 

Comments (0) Trackbacks (0)

No comments yet.


Leave a comment

No trackbacks yet.