null  

2002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece (ed_100289)

(No reviews yet) Write a Review
$161.00 $238.00
(You save $77.00 )
SKU:
ed_100289
Stock:
1
Availability:
In Stock
Location:
Fullerton, California
Material:
FRP
Category Type:
Exterior
Category Type:
Rear Bumpers or Lips
Material Info:
⚠️FIBERGLASS ➡ REQUIRES PREP WORK⚠️ SHIPS FROM USA

Product Overview

2002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece (ed_100289)

2002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 12002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 22002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 32002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 42002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 52002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 62002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 72002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 82002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece - Image 9

  • 2002-2005 Audi A4 B6 4DR Duraflex R-1 Rear Lip Under Spoiler Air Dam (euro spec) - 1 Piece
  • Note: rear lip is designed for euro spec. US version will have to be extended to fit.
  • Fits the following models: Base Model, 2.0T, 3.2T
  • Hand laid, high quality 6 oz. fiberglass
  • Signature black finish
  • High quality weather resistant aluminum mesh grille (where applicable)
  • Proprietary polymer blend for maximum flexibility
  • Increased durability and longer service life
  • Modified Aerodynamics
  • Reduced damage rate up to 75%
  • Limited warranty and satisfaction guarantee




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews