null  

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Kit 14 Piece (ed_112646)

(No reviews yet) Write a Review
$1,819.00 $2,675.00
SKU:
ed_112646
Stock:
0
Availability:
Out of Stock
Location:
-
Material:
FRP
Category Type:
Exterior
Category Type:
Complete Body Kits

Product Overview

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Kit 14 Piece (ed_112646)

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Kit - 14 Piece - Includes GT500 V2 Front Bumper (112640) GT500 V2 Front Splitter (112641) GT500 V2 Side Skirt Rocker Panels (112642) GT500 V2 Rear Diffuser (112643) GT500 V2 Front Fender Flares (112644) GT500 V2 Rear Fender Flares (112645) GT500 V2 Rear Wing Trunk Lid Spoiler (109694)

Note: Fenders are 45mm ( front) and 70mm (rear) wider than stock.


  • Hand laid, high quality 6 oz. fiberglass
  • Signature black finish
  • High quality weather resistant aluminum mesh grille (where applicable)
  • Proprietary polymer blend for maximum flexibility
  • Increased durability and longer service life
  • Modified Aerodynamics
  • Reduced damage rate up to 75%

Kit Includes:

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Front Bumper 1 Piece (ed_112640)

2013-2020 Scion FR-S Subaru BRZ Duraflex GT500 V2 Front Splitter 1 Piece (ed_112641)

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Side Skirt Rocker Panels 2 Piece (ed_112642)

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Rear Diffuser 1 Piece (ed_112643)

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Front Fender Flares 4 Piece (ed_112644)

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Rear Fender Flares 4 Piece (ed_112645)

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Rear Wing Trunk Lid Spoiler 1 Piece (ed_109694)




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews