ModeloDrive FRP MTEC Body Kit > BMW 3-Series 318i 325i E30 1984-1991 > 2dr Coupe (modelodrive_119721)

(No reviews yet) Write a Review
$663.00 $975.00
SKU:
modelodrive_119721
Stock:
0
Location:
-
Availability:
Out of Stock
Material:
FRP
Category Type:
Exterior
Category Type:
Complete Body Kits

Product Overview

ModeloDrive FRP MTEC Body Kit > BMW 3-Series 318i 325i E30 1984-1991 > 2dr Coupe (modelodrive_119721)

This is a MTEC Body Kit manufactured or distributed by ModeloDrive with FRP being the primary exterior surface material. ModeloDrive FRP (fiberglass) parts are made to a higher standard than most mass produced US market fiberglass parts. Holes will not always be pre-drilled so you still will need to dry fit the parts before they can be prepped and finished. Due to the nature of fiberglass there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment but generally speaking less than the competition.

Kit Includes:

ModeloDrive FRP MTEC Front Bumper > BMW 3-Series 318i 325i E30 1984-1991> 2/4dr (modelodrive_110565)

ModeloDrive FRP MTEC Side Skirts > BMW 3-Series 318i 325i E30 1984-1991 > 2dr Coupe (modelodrive_110566)

ModeloDrive FRP MTEC Door Caps 2pc > BMW 3-Series 318i 325i E30 1984-1991 > 2dr Coupe (modelodrive_119719)

ModeloDrive FRP MTEC Rear Bumper > BMW 3-Series 318i 325i E30 1984-1991> 2/4dr (modelodrive_119720)




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews