VSaero Carbon Fiber DRAC Super Front Lip Valance > Toyota MR2 SW20 1991-1995 (vsaero_108525)

(No reviews yet) Write a Review
$510.00 $750.00
SKU:
vsaero_108525
Stock:
0
Notes:
Front lip only, you will need to attach this to an OEM bumper, it will not attach to an aftermarket styled bumper.
Availability:
Out of Stock
Location:
-
Material:
Carbon Fiber
Category Type:
Front Bumpers or Lips
Category Type:
Exterior

Product Overview

NOTES: Front lip only, you will need to attach this to an OEM bumper, it will not attach to an aftermarket styled bumper.

VSaero Carbon Fiber DRAC Super Front Lip Valance > Toyota MR2 SW20 1991-1995 (vsaero_108525)

This is a DRAC Super Front Lip Valance manufactured or distributed by VSaero primarily made of Carbon Fiber material. Most carbon fiber parts we sell are "wet" carbon fiber, this means they have that "wet" glossy look, the only exception to this is then the product specifically states "dry". Dry carbon is usually lighter than wet carbon but has a dull flat finish. Most carbon fiber parts are reinforced with a FRP underside. When installing Carbon Fiber hoods make sure you are using hood pins and do not use hydraulic arms to prop open hoods and trunks as they can warp the light weight components over time. Carbon fiber parts may require modifications such as: Drilling of holes / cutting / sanding / fixing cracks / buffing to eliminate scratches, etc. Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. VSaero Carbon Fiber parts are made with handlaid wetcarbon with plastic resin. Genuine show quality carbon reinforced with FRP fiberglass backing. Aeroparts are to be installed by a professional body shop. Bolts, screws, and double sided tape is not included. Fiberglass underside areas may require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Carbon fiber parts are reinforced with a fiberglass backing for added strength. Carbon fiber parts still require prep work. You will need to preform taks such as: buffing, drilling holes (for winshield squirters, etc), adding or removing fiberglass (mounting tabs, etc). Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Carbon is a composite material and may exhibit more gap than OEM materials. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews