VSaero FRP RAME FC2000 Front Bumper w Lenses > Mazda RX-7 FC3S 1986-1992 (vsaero_108189)

(1 review) Write a Review
$255.00 $375.00
SKU:
vsaero_108189
Stock:
0
Notes:
This bumper is made from a new mold, we now include blue lenses and clear lens covers as well. Make sure you replace the screws holding down the lenses with stainless steel bolts, washers, nuts and ... (see description)
Availability:
Out of Stock
Location:
-
Material:
FRP
Category Type:
Front Bumpers or Lips
Category Type:
Exterior

Product Overview

NOTES: This bumper is made from a new mold, we now include blue lenses and clear lens covers as well. Make sure you replace the screws holding down the lenses with stainless steel bolts, washers, nuts and a gasket for a proper setup (not included), some adjustment may be necessary to fully align them with your hood.

VSaero FRP RAME FC2000 Front Bumper w Lenses > Mazda RX-7 FC3S 1986-1992 (vsaero_108189)

This is a RAME FC2000 Front Bumper w Lenses manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews

Write a Review
  • hotrodlsc7 Apr 18th 2022

    4

    great seller! would buy again.