VSaero FRP TKYO Bunny v2 Wide Body Kit w Wing 20pc > Scion FR-S ZN6 2013-2016(vsaero_108737)

(No reviews yet) Write a Review
Was: $1,676.00
Now: $1,139.00
SKU:
vsaero_108737
Stock:
2
Type:
Exterior
Type:
Wings

Product Overview

This is a TKYO Bunny v2 Wide Body Kit w Wing 20pc manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.

Kit Includes:

VSaero FRP TKYO Bunny v2 Front Bumper > Scion FR-S ZN6 2013-2016 (vsaero_108450)


VSaero FRP TKYO Bunny v2 Wide Body Front Splitter > Scion FR-S ZN6 2013-2016 (vsaero_108451)


VSaero FRP TKYO Bunny v2 Wide Body Front Canards 6pc > Scion FR-S ZN6 2013-2016 (vsaero_108452)


VSaero FRP TKYO Bunny v2 Wide Body 45mm Fender Flares (front) 4pc > Scion FR-S ZN6 2013-2016 (vsaero_108453)


VSaero FRP TKYO Bunny v2 Side Skirts > Scion FR-S ZN6 2013-2016 (vsaero_108454)


VSaero FRP TKYO Bunny v2 Wide Body 70mm Fender Flares (rear) 4pc > Scion FR-S ZN6 2013-2016 (vsaero_108455)


VSaero FRP TKYO Bunny v2 Rear Diffuser > Scion FR-S ZN6 2013-2016 (vsaero_108456)


VSaero FRP TKYO Bunny v2 Spoiler Wing > Scion FR-S ZN6 2013-2016 (vsaero_108458)


New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews

(No reviews yet) Write a Review