Shipping
Shipping across US
Local pick-up available ONLY at:
Las Vegas, Nevada
Presenting the Carbon Fiber TKYO Wide Body Flares Set >(SW20) for the 1991-1995 Toyota MR2, a top-tier enhancement from ModeloDrive that’s designed to elevate both the aesthetics and potential performance of your vehicle. This Fenders is meticulously crafted to complement the aerodynamic lines of your car, delivering a sleek, aggressive look that highlights the Toyota MR2's bold design.
The Carbon Fiber TKYO Wide Body Flares Set >(SW20) is engineered with precision, offering potential performance benefits that could enhance your overall driving experience.
Constructed from lightweight yet strong Carbon Fiber materials, the Carbon Fiber TKYO Wide Body Flares Set >(SW20) adds little to no additional weight to your vehicle. Its aerodynamic shape is designed to improve performance and efficiency.
Please note that the necessary installation hardware is not included. For a secure fit, you'll likely need to source OEM Toyota MR2 hardware, along with any custom fasteners such as screws, bolts, or possibly brackets, depending on your vehicle’s setup.
The Carbon Fiber TKYO Wide Body Flares Set >(SW20) features a customizable finish, allowing you to paint it to match your vehicle’s color. This provides the opportunity to personalize your car, giving it a distinct look that reflects your individual style.
At ModeloDrive, we are committed to providing high-quality products. The Carbon Fiber TKYO Wide Body Flares Set >(SW20) is no exception, with each unit undergoing thorough testing to ensure it meets our performance standards.
If you’re looking to upgrade your Toyota MR2, the Carbon Fiber TKYO Wide Body Flares Set >(SW20) from ModeloDrive is an excellent choice. Combining cutting-edge design and premium materials, it’s an upgrade that enhances both the look and performance of your Toyota MR2.
Toyota FendersMR2 FendersModeloDrive FendersToyota Carbon Fiber FendersMR2 Carbon Fiber Fenders
This is a TKYO Wide Body Flares Set manufactured or distributed by ModeloDrive with Carbon Fiber being the primary exterior surface material. Most carbon fiber parts we sell are "wet" carbon fiber, this means they have that "wet" glossy look, the only exception to this is then the product specifically states "dry". Dry carbon is usually lighter than wet carbon but has a dull flat finish. When installing ModeloDrive Carbon Fiber parts make sure you are using hood pins on hoods and do not use hydraulic arms to prop open hoods and trunks as they can warp the light weight components over time. ModeloDrive Carbon fiber parts may require modifications such as: Drilling of holes / cutting / sanding / fixing cracks / buffing to eliminate scratches, etc. Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Our Carbon Fiber parts are made with handlaid wetcarbon with plastic resin. Genuine show quality carbon reinforced with FRP fiberglass backing. Aeroparts are to be installed by a professional body shop. Bolts, screws, and double sided tape is not included. Carbon Fiber parts often have a fiberglass underside which may require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.
New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Carbon fiber parts are reinforced with a fiberglass backing for added strength. Carbon fiber parts still require prep work. You will need to preform taks such as: buffing, drilling holes (for winshield windshield water nozzles, etc), adding or removing fiberglass (mounting tabs, etc). Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Carbon is a composite material and may exhibit more gap than OEM materials. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.
ModeloDrive fenders and fender flares are aftermarket accessories specifically designed for track, show, and off-road use. These components are made from high-quality materials. Fiberglass parts may require modifications like cutting, while carbon fiber reinforced fiberglass typically needs less preparation; however, minor adjustments may still be necessary, such as drilling holes for bolts or wiper nozzles. ModeloDrive disclaims any responsibility for damage, injury, or loss resulting from the use of these products.
Fender Flares
ModeloDrive fender flares are designed to extend the wheel arch for a more aggressive stance, often matching the style of a complete body kit. Depending on the style, some fender flares may need to be attached using rivet nuts with a rubber gasket between the flare and the original fender, neither of which is included. More aggressive flares may also require cutting and rolling of the original fender to allow for greater wheel clearance and a lower stance. Due to the nature of fiberglass, adjustments during installation are common; care must be taken to ensure proper alignment and fitment to avoid gaps or uneven surfaces.
Fenders
ModeloDrive fenders provide an aesthetic upgrade, giving vehicles a sleeker and more customized appearance. These lightweight fiberglass replacements often require additional fiberglass reinforcement around the A-pillar and the fender mounting flange for durability and a secure fit. Trimming and reshaping the fender may be necessary to align with the vehicle’s mounting points. Modifications to factory components, such as removing fender liners or adjusting brackets, may also be needed for proper installation.
For best results, ModeloDrive recommends professional installation by a custom shop experienced in working with fiberglass. Traditional auto repair shops may lack the necessary expertise for proper trimming, cutting, or modifying fiberglass components.
Disclaimer
Like all ModeloDrive body kits and accessories, these fenders and fender flares are strictly for track, show, or off-road use only. Due to Department of Transportation (DOT) regulations, most ModeloDrive fenders and fender flares are not street legal. ModeloDrive does not endorse or recommend using these products on public roads or highways.
Part#: modelodrive_119355
ModeloDrive
Part#: modelodrive_119356
ModeloDrive
Part#: modelodrive_119354
ModeloDrive
Part#: modelodrive_119352
ModeloDrive
