Shipping
Shipping across US
Local pick-up available ONLY at:
Las Vegas, Nevada
Information:
⚠️FIBERGLASS ➡ REQUIRES PREP WORK⚠️ SHIPS FROM USA
Presenting the FRP FDES Spoiler Wing >(970) for the 2010-2013 Porsche Panamera, a top-tier enhancement from ModeloDrive that’s designed to elevate both the aesthetics and potential performance of your vehicle. This Wings is meticulously crafted to complement the aerodynamic lines of your car, delivering a sleek, aggressive look that highlights the Porsche Panamera's bold design.
The FRP FDES Spoiler Wing >(970) is engineered with precision, offering potential performance benefits that could enhance your overall driving experience.
Constructed from lightweight yet strong FRP materials, the FRP FDES Spoiler Wing >(970) adds little to no additional weight to your vehicle. Its aerodynamic shape is designed to improve performance and efficiency.
Please note that the necessary installation hardware is not included. For a secure fit, you'll likely need to source OEM Porsche Panamera hardware, along with any custom fasteners such as screws, bolts, or possibly brackets, depending on your vehicle’s setup.
The FRP FDES Spoiler Wing >(970) features a customizable finish, allowing you to paint it to match your vehicle’s color. This provides the opportunity to personalize your car, giving it a distinct look that reflects your individual style.
At ModeloDrive, we are committed to providing high-quality products. The FRP FDES Spoiler Wing >(970) is no exception, with each unit undergoing thorough testing to ensure it meets our performance standards.
If you’re looking to upgrade your Porsche Panamera, the FRP FDES Spoiler Wing >(970) from ModeloDrive is an excellent choice. Combining cutting-edge design and premium materials, it’s an upgrade that enhances both the look and performance of your Porsche Panamera.
Porsche WingsPanamera WingsModeloDrive WingsPorsche FRP WingsPanamera FRP Wings
WARNING, you MUST have an ASE certified bodyshop install this wing, NOT a DIY part. Switch OFF electric power to drive motor. Make sure it does not switch on again. Check that there is no electrc charge. Wing does slide up and down but when it is in the up position it obscures the rear view.
| Make | Model | Year |
|---|---|---|
| Porsche | Panamera | 2010 |
| Porsche | Panamera | 2011 |
| Porsche | Panamera | 2012 |
| Porsche | Panamera | 2013 |
This is a FDES Spoiler Wing manufactured or distributed by ModeloDrive with FRP being the primary exterior surface material. ModeloDrive FRP (fiberglass) parts are high quality aero parts now available to the US market. ModeloDrive FRP aerodynamics have set a new standard for the fiberglass market. You may need to dry fit the parts and drill holes before prepping and finishing. Fiberglass may have cracks or surface imperfections that need filling and/or leveling. A professional body shop should fix any issues in the prep stage of installation and install the parts. You will need bolts, screws, and double sided tape, which are not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling, cutting to ensure proper fitment but usually less than the competition.
New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.
All wings, roof wings, trunk spoilers, and GT wings offered by ModeloDrive are designed to enhance your vehicle's appearance and performance. These parts are specifically crafted for off-road and show use and may require modifications for proper installation. Custom bodywork, such as sanding, shaving, or trimming, may be necessary to ensure a perfect fit.
Roof Wings
ModeloDrive roof wings are typically installed using automotive-grade adhesive or trim tape. Depending on the design, additional modifications or reinforcement may be required to achieve secure placement and proper fitment.
Trunk Spoilers
For trunk spoilers, you may need to drill holes or make additional adjustments to align the spoiler with your vehicle. Proper attachment is key to ensuring both functionality and aesthetic appeal.
GT Wings
ModeloDrive GT wings are designed to create significant downforce, making secure installation critical. Drilling and reinforcement may be necessary at the mounting points. Additional hardware or brackets may also be required to ensure stability and durability for larger GT wings.
To achieve the best results, professional installation by a custom shop experienced with these products is highly recommended. This will ensure proper fitment and long-term performance, especially for more complex installations.
Due to Department of Transportation (DOT) regulations, ModeloDrive products are intended for off-road and show use only. They may not meet DOT regulations and are not street legal. ModeloDrive assumes no responsibility for damage or injury caused by improper installation or use.
Part#: modelodrive_120022
ModeloDrive
Part#: modelodrive_110101
ModeloDrive
Part#: modelodrive_110099
ModeloDrive
Part#: modelodrive_110103
ModeloDrive
