ModeloDrive Carbon Fiber CSL Duckbill Trunk > BMW 4-Series F32 2014-2020 (modelodrive_119637)
This is a CSL Duckbill Trunk manufactured or distributed by ModeloDrive with Carbon Fiber being the primary exterior surface material. If you are looking for high-quality carbon fiber aerodynamic products for your vehicle, look no further than ModeloDrive. We have over 15 years of experience in making carbon fiber products that are trusted by professional drivers and admired by car enthusiasts. We create our products with the best materials and craftsmanship. Our carbon fiber is reinforced with fiberglass to increase strength and affordability, and has a consistent weave pattern and a high carbon/resin ratio. We also apply a premium clear coat with UV protection to ensure a lasting shine. Our products are not only stylish, but also functional for the designs that offer increased cooling and weight reduction. Whether you are into auto racing, drifting, or drag racing, our products will give you an edge over the competition. To install ModeloDrive Carbon Fiber parts, make sure you are using hood pins on hoods and do not use hydraulic arms to prop open hoods and trunks as they can warp the lightweight components over time. You may need OEM/additional hardware and double sided tape, (not included). Aero parts are to be installed by a professional body shop. Carbon fiber parts have a fiberglass underside which may require modification, shaving, sanding, drilling to install hood pins or other hardware for proper fitment.
New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Carbon fiber parts are reinforced with a fiberglass backing for added strength. Carbon fiber parts still require prep work. You will need to preform taks such as: buffing, drilling holes (for winshield windshield water nozzles, etc), adding or removing fiberglass (mounting tabs, etc). Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Carbon is a composite material and may exhibit more gap than OEM materials. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.