null  

ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 (modelodrive_120150)

(No reviews yet) Write a Review
$510.00 $750.00
SKU:
modelodrive_120150
Location:
-
Availability:
Out of Stock
Notes:
This REQUIRES that your Corolla already has the Levin front end.
Stock:
0
Material:
FRP
Category Type:
Exterior
Category Type:
Diffusers

Product Overview

ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 (modelodrive_120150)

ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 - Image 1ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 - Image 2ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 - Image 3ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 - Image 4ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 - Image 5ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 - Image 6ModeloDrive FRP VAR Rear Bumper w Diffuser 4pc > Toyota Supra JZA80 1993-1998 - Image 7

This is a VAR Rear Bumper w Diffuser 4pc manufactured or distributed by ModeloDrive with FRP being the primary exterior surface material. ModeloDrive FRP (fiberglass) parts are made to a higher standard than most mass produced US market fiberglass parts. Holes will not always be pre-drilled so you still will need to dry fit the parts before they can be prepped and finished. Due to the nature of fiberglass there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment but generally speaking less than the competition.




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews