VSaero FRP TKYO Boss Wide Body 50mm Fenders (front) > Nissan 240SX S14 1995-1998 (vsaero_108490)

(No reviews yet) Write a Review
$316.00 $466.00
SKU:
vsaero_108490
Stock:
5
Notes:
This component must be used in conjuction with the entire VSaero TKYO BOSS kit, it will not fit with any other kit and will not fit a stock car without a kit. Rolling and trimming of your oem stock ... (see description)
Availability:
In Stock
Location:
Las Vegas
Material:
FRP
Category Type:
Exterior
Category Type:
Fenders

Product Overview

NOTES: This component must be used in conjuction with the entire VSaero TKYO BOSS kit, it will not fit with any other kit and will not fit a stock car without a kit. Rolling and trimming of your oem stock fender may be required for proper fitment of wheels and flares.

VSaero FRP TKYO Boss Wide Body 50mm Fenders (front) > Nissan 240SX S14 1995-1998 (vsaero_108490)

This is a TKYO Boss Wide Body 50mm Fenders (front) manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews