VSaero FRP TKYO v2 Wide Body Kit > Porsche Cayman 987 2006-2008 (vsaero_109080)

(No reviews yet) Write a Review
$1,904.00 $2,800.00
SKU:
vsaero_109080
Stock:
0
Notes:
This kit is designed for the early model 987.1 Cayman.
Availability:
Out of Stock
Location:
-
Material:
FRP
Category Type:
Exterior
Category Type:
Complete Body Kits

Product Overview

NOTES: This kit is designed for the early model 987.1 Cayman.

VSaero FRP TKYO v2 Wide Body Kit > Porsche Cayman 987 2006-2008 (vsaero_109080)

This is a TKYO v2 Wide Body Kit manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.

Kit Includes:

VSaero FRP TKYO v2 Wide Body Front Lip > Porsche Cayman 987 2006-2008 (vsaero_109074)

VSaero FRP TKYO v2 Wide Body Front Bumper 3pc > Porsche Cayman 987 2006-2008 (vsaero_109075)

VSaero FRP TKYO v2 Wide Body 50mm Fender Flares (front) > Porsche Cayman 987 2006-2008 (vsaero_109076)

VSaero FRP TKYO v2 Wide Body Side Skirts > Porsche Cayman 987 2006-2008 (vsaero_109077)

VSaero FRP TKYO v2 Wide Body 100mm Fender Flares (rear) > Porsche Cayman 987 2006-2008 (vsaero_109078)

VSaero FRP TKYO v2 Wide Body Rear Bumper > Porsche Cayman 987 2006-2008 (vsaero_109079)




New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews