NOTES: Includes wing. Wide body flares add-on to your existing metal flares, the purpose of the wide body flare is to allow wider wheels. You will need rivet the flare to your OEM fender and trim or roll the inner portion of your metal fender that is concealed by the flare so that it will accomodate wider wheels without scraping.
VSaero FRP TKYO v3 Wide Body Kit w Wing 18pc > Toyota 86 2017-2020 (vsaero_109186)
This is a TKYO v3 Wide Body Kit w Wing 18pc manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.
VSaero FRP TKYO v3 Wide Body Front Bumper > Toyota 86 2017-2020 (vsaero_109177)
VSaero FRP TKYO v3 Wide Body Front Spoiler Lip > Toyota 86 2017-2020 (vsaero_109178)
VSaero FRP TKYO v3 Wide Body Canards 8pc > Toyota 86 2017-2020 (vsaero_109179)
VSaero FRP TKYO v3 Wide Body 65mm Fender Flares (front) > Toyota 86 2017-2020 (vsaero_109180)
VSaero FRP TKYO v3 Wide Body Side Skirts > Toyota 86 2017-2020 (vsaero_109181)
VSaero FRP TKYO v3 Wide Body 90mm Fenders Flares (rear) > Toyota 86 2017-2020 (vsaero_109182)
VSaero FRP TKYO v3 Rear Diffuser > Toyota 86 2017-2020 (vsaero_109183)
VSaero FRP TKYO v3 Trunk Spoiler Wing > Toyota 86 2017-2020 (vsaero_109185)
New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.